Motorized Feeding Cart – Supercart
Make the chore of feeding pleasant !
A motorized feed cart specially designed to facilitate the chore of feeding !
All components of Valmetal feed carts are engineered for outstanding performances, extended life and low maintenance.
Download the Brochure
Traditional beaters

TMR beaters
Available models

Supercart CC
LEFT/RIGHT CHAIN CONVEYOR The CC model features a cross conveyor driven by a sturdy reversible gearbox that allows to unload on either side of the cart for more flexibility. Foot operated all the components are underneath the cart to eliminate damage from curbs and doorways. Easy access for maintenance The CC model is available in different sizes:
- 525 (32 cu.ft./0,9 m³) for 5.5Hp
- 530 (38,5 cu.ft./1 m³) for 5.5Hp
- 542 (54 cu.ft./1,5 m³) for 5.5Hp
- 960 (77 cu.ft./2,1 m³) for 9Hp
- 975 (96 cu.ft./2,7 m³) for 9Hp

Supercart HT
HIGH UNLOADING AUGERS Specially designed for elevated mangers, the HT model features an inclined bottom section and twin discharge augers to evenly discharge the ration. A 16’’ long slide is supplied with the cart to carry the feed further away if needed. The bottom of the discharge opening is 40’’ from the floor. High discharge models for elevated mangers (right side only).
- 530 (38,5 cu.ft./1 m³) for 5.5Hp
- 542 (54 cu.ft./1,5 m³) for 5.5Hp
- 960 (77 cu.ft./2,1 m³) for 9Hp
See the video: http://youtu.be/pv1YKxJNsTE

Supercart VA
WITH (RIGHT) UNLOADING AUGER The VA model is equipped with a twelve (12) inch sturdy discharge auger (right hand discharge only) for a fast and uniform unloading of the ration. The U trough is lined with an abrasion resistant polymer liner (UHMW). A seat is also available for greater confort (option). The VA model is available in different sizes :
- 525 (32 cu.ft./0,9 m³) for 5.5Hp
- 530 (38,5 cu.ft./1 m³) for 5.5Hp
- 542 (54 cu.ft./1,5 m³) for 5.5Hp
- 960 (77 cu.ft./2,1 m³) for 9Hp
- 975 (96 cu.ft./2,7 m³) for 9Hp

Supercart AF
Front unload model also available for very narrow aisles
Features

Simplicity
Machine components are easily accessible, allowing for quick maintenance. Access doors are hinge-mounted. Floor is bolted for easy replaceme...

Ergonomy
The easy to use levers and pedals, designed with advanced ergonomics, contribute to the operator’s comfort and performance of the cart !

Electric starter
Optional 12 VDC electric starter and battery.

Bottom view
The 960 & 975 Supercart are now equipped with wheel motors (standard). TOP OF THE LINE: This means less moving parts, less maintenance and stronger results

Supercart VA

Supercart CC

Supercart HT

Wheels & tires
Different models of anti-flat tires are available (Valmetal features exclusive six-ply tires as standard equipment). Drive traction wheels c...

Seat
A seat is also available for greater confort (option).

Angle
To facilitate the movement of the material and avoid accumulation, there is now an angle right before the top beater.
In Action !
Benefits
- 6 plies tires (4 or 6)
- Heavy duty #662 pintle apron and conveyor chains
- High performance hydrostatic pump
- Direct driven by two (2) hydraulic motors
- Translucent oil reservoir and replaceable oil filter for extended life
- Parking brake
- Easy access fueling cap
- Anti-vibration motor base
- Engine guard
- Efficient steering system
Figures
525
(32 ft³/0,9 m³) for a 5.5Hp motor on VA and CC models
530
(38,5 ft³/1 m³) for a 5.5Hp motor on VA, CC and HT models
542
(54 ft³/1,5 m³)for a 5.5Hp motor on VA, CC and HT models
960
(77 ft³/2,1 m³) for a 9Hp motor on VA, CC and HT models
975
(96 ft³/2,7 m³) for a 9Hp motor on VA and CC models